Cemimax Levelling System.
Explore Floating Master, DL55, DL59 and DL59 BI TURBO. Compare their key specifications below, view the 2026 selection guide and download the original technical data sheets.
Contact us for current pricing, availability and product information.
Plan your quantities
Share the approximate floor area and the products you need.
Check the details
Confirm the product specifications and suitability for your project before ordering.
Talk to our team
Tell us your suburb and whether you need supply only or installation.
Choose the right
foundation.
Compare the strength, application thickness and mixing requirements of four levelling options. Use the full technical data sheet to confirm substrate preparation, installation conditions and the suitability of your floor covering.
Floating Master
1–10 mm application thickness.
Fine levelling from 1 mm. Smooth finish, with hand-mix or pump application.
DL55
1.5–50 mm application thickness.
Interior commercial levelling. Suitable for underfloor heating; hand-mix or pump application.
DL59
1.5–100 mm application thickness.
High-traffic applications, polishable overlays, acoustic underlays and suitable timber substrates.
DL59 BI TURBO
1.5–40 mm application thickness.
Rapid-setting option. The selection guide lists high early strength and pump application.
| Specification | Floating Master | DL55 | DL59 | DL59 BI TURBO |
|---|---|---|---|---|
| 28-day compressive strength | 25 MPa | 35 MPa | 40 MPa | 50 MPa |
| Application thickness · single coat | 1–10 mm | 1.5–50 mm | 1.5–100 mm | 1.5–40 mm |
| Mixing water · per 20 kg | 5.0–5.3 L | 4.4 L | 4.4–4.6 L | 4.25–4.5 L |
| Open time · approx. | 20–30 minutes | 20–30 minutes | 20–30 minutes | 15–20 minutes |
| Walk-on time · approx. | Approx. 2 hours | Approx. 2 hours* | Approx. 2 hours | Approx. 30 minutes |
| Coverage · per 20 kg at 3 mm | Approx. 4 m² | Approx. 4 m² | Approx. 4 m² | Approx. 4–5 m² |
| Flooring route · selection guide | Floating floors | Glue-down flooring | Glue-down flooring | Glue-down flooring |
| VOC level | < 0.5 mg/m³ · supplied data sheets and selection guide | |||
On a phone, swipe the comparison table sideways to view all four products. Figures are from the supplied technical sheets and 2026 selection guide. Times vary with temperature, humidity, ventilation, substrate and application thickness. Walk-on time does not mean the surface is ready for a floor covering.
* DL55 contains inconsistent walk-on and thickness entries. This overview uses the 1.5–50 mm application-data range and approximately 2-hour walk-on guidance. Confirm the current manufacturer requirements before installation. Floating Master, DL55 and DL59 sheets indicate around 1 day before installation or bonding, depending on thickness; verify actual drying and readiness on site. DL59 BI TURBO values are from the selection guide; contact us for its current technical sheet.
Read the full details.
View the complete 2026 comparison guide and download the original product data sheets.
2026 product selection guideView image ↗Floating MasterDownload PDF ↓DL55Download PDF ↓DL59Download PDF ↓Prepare before you pour.
The substrate must be sound, load-bearing, dry and free of materials that reduce adhesion. Remove weak layers and dust, choose the appropriate primer and allow it to dry. Follow the product-specific water ratio and do not over-water. Read the technical sheet for preparation, safety and installation requirements.
Need help choosing a product? Share the floor area, substrate, required build-up and intended flooring finish with our team.
Let's plan
your project.
Tell us your approximate area, suburb and the products you have in mind. We can discuss supply, installation, availability and pricing.
Find us in Silverwater17 Fariola St
Silverwater NSW 2128